Ultrasonic agitation Vapor Degreasing Machine

01: Ultrasonic agitation Vapor Degreasing Machine

The Ultrasonic agitation Vapor Degreasing Machine is a simple and streamlined,yet highly effective and economical, means of degreasing and cleaning parts of all shapes and sizes, a single compact machine performs all the steps necessary for precision cleaning in additive ultrasonic agitation, including rinsing, scrubbing and drying with minimal effort from the machine operator and without the use of water, instead of water, it is the solvent that does the heavy lifting here

Why is Ultrasonic agitation Vapor Degreasing Machine superior to other methods?

Other cleaning processes require multiple machines for rinsing, scrubbing and drying, the need for multiple machines means a higher upfront cost, higher incurred energy costs, higher cleaning time and more floor space needs to accommodate such machinery

02: How Does Ultrasonic agitation vapor degreasing machine work?

Ultrasonic agitation Vapor Degreasing Machine is a solvent cleaning process, simple put, an Ultrasonic agitation Vapor Degreasing Machine is a metal apparatus with heating elements at the bottom, and cooling coils toward the top, once solvent is in the machine, and the machine is turned on, the heating element brings the liquid solvent to a boil, turning the solvent gaseous, the cooling coils located above the heating element prevent the solvent vapor from escaping the device, creating an atmosphere, after the parts are lowered into the atmosphere, the vapor clings to and condenses onto the parts, then the parts are lifted out of the atmosphere, and the liquid solvent drips off the parts via gravity and back into the reservoir for recycled use, when the procedure is finished, the parts are dry and clean of all soils

03: What is the basic rundown for operating Ultrasonic agitation Vapor Degreasing Machine?

The first step of the solvent cleaning process is to pour the solvent into the Ultrasonic agitation Vapor Degreasing Machine. Next, set the temperature that your want the solvent to reach, the temperature varies depending on the solvent your choose, different solvent have different boiling temperature, the end goal is to get the solvent to boil, which causes it to turn gaseous

After the proper temperature is set, turn the Ultrasonic agitation Vapor Degreasing Machine on to initiate both the cooling coils and the heating element, once the Ultrasonic agitation Vapor Degreasing Machine reaches the proper temperature and the solvent is boiling, you are ready to start cleaning your parts

There last steps can either be automated or done manually, place the items that need cleaning in a metal basket and slowly lower the basket into the gaseous atmosphere, which is below the cooling coils but above the boiling solvent, allow the solvent vapor to cling to and condense on the parts, as you slowly lift the basket out of the Ultrasonic agitation Vapor Degreasing Machine, the solvent drips off the parts and falls back into the boiling solvent, leaving the parts clean and dry

04: Is Ultrasonic agitation Vapor Degreasing Machine safe?

As with most industrial processes, Ultrasonic agitation Vapor Degreasing Machine is not dangerous so long as proper safety protocols are followed, one of the most important consideration in this regard is ventilation, it is recommended that a floor draft system be installed

In addition, you should always use personal protection equipment, and consult the safety data sheet included with your solvent shipment for specific handling and usage instructions

05: What does Ultrasonic agitation Vapor Degreasing Machine refer to?

Ultrasonic degreasing machine is an optional further step in vapor degreasing, it is used if oil and flux remain on parts after the basket is lifted out of the vapor degreaser’s gaseous atmosphere

A separate reservoir in the vapor degreaser contains a solvent as well as a device that creates micro vibrations in the liquid solvent, when the basket with parts is fully submerged in this tank, the ultrasonic vibration work in a similar fashion to scrubbing, helping to remove contaminants from the parts, after holding the parts in the ultrasonic tank for some times, simple lift the basket into the atmosphere and then slowly lift out just as your would if you have not used the ultrasonic degreasing tank, check out attached vapor degreasing guide for more information, once you have all the facts, get in touch with keepleader to learn more about our complete product line, we are ready to answer any question and help you find the solution that is right for you