Hand-Held Electric Heated Branding Iron with Rotary Numbering Die for Sequence Number_Serial Number Hot Branding_Marking Printer

Hand-Held Electric Heated Branding Iron with Rotary Numbering Die

Product description

Hand-Held Electric Heated Branding Iron with Rotary Numbering Die

01: Parameter

02: Application

Hand-Held Electric Heated Branding Iron with Rotary Numbering Die is used to mark surfaces for an array of different purposes, most commonly used to identify a product with a certain brand company, rotary dial brander can be used on all types of materials, from wood and plastic to robber and leather

They represent a quick and efficient method for companies to promote their brand on their products, they are also useful when it comes to tracking, and lost goods as the branding logo will automatically inform the public as to the original manufacturer of the goods

03: High lightings

Precision elements wound around a high conductivity core provides consistent die temperature and a long service life

Ultra strong nickel plated wheels can be clamed in a vise for easy maintenance, anodized aluminum case is well insulated treatment and earth wire circuit design, dual fuse mounted for safe operation

Plastic handle ensure a cool grip

Burn resistant, flexible, neoprene power cord

Numbering roller can be supplied blank or engraved to your specification

All major parts (heater, handle and cord) are user replaceable

Three-wire grounded construction

Each to operate (all in one, digital temperature can read, dial the wheels freely)

Affordable (all is made in our owned shop, cost-saving production)

Fast changeover to new wheel (the buyer can order spare wheels for further use)

Numbering roller is hot and ready to use after each changeover

Each of the wheels include the numbers 0~9, a dash, and a blank space

Can be custom designed with your choice of letter, number, and character sequencing

Provide a practical and affordable way to apply serial brands

Compact design keeps every character hot and ready to use

Brand characters in wood, plastic, rubber or any brand able material

04: Hand-Held Electric Heated Branding Iron with Rotary Numbering Die

Rotary serial heads are typically used for high volume production marking and where versatility for automatic or manual advance numbering is required to stamp repetitive sequences such as product codes, part numbers date, codes etc, there is virtually no limit to the range of products that can be marked with Rotary serial heads
Rotary serial heads are designed and built to meet your specific serial numbering and sequential part marking requirements, KEEPLEADER’ rotary serial heads are available in a variety of different styles and configurations for both numbering and lettering are provide a reliable way to mark serial numbers and other identification on all type of parts

05: Warning notices

Cannot leave this unattended or set it down on anything flammable

The hot steel brander get soft and somewhat pliable you can accidently cause the face to became uneven

Typically an electric rotary dial brander is ready for use about 20~30 minutes after having been switched on, please take notice on the temperature controller, if the read Value of PV and SV are same, the heating temperature is reached its rated

You should keep your serial brander clean, make sure to clean in between uses to extend shelf life

Please take much longer for the brander to cool off that heat up

Don’t touch the brander until you are sure it is completely cooled

Don’t push too hard, the heat will transfer even with limited pressure, so don’t think that pushing on it will make it work better, it will only damage the head over time

Wear safety equipment while working including eye protection, if steam or smoke comes out while you are branding, you want to make sure that you are covered

Don’t rush the heating pressure, you don’t want to try and use it before it is ready, as that will create sloppy results

Don’t submerge electric rotary serial brander in water to cool them off

Never leave the iron in a vertical position as that can damage internal electronics and will result in the handle getting hot

Because the branding surface have not 100% uniform surface, somewhat weaken print, please rock the brander slightly to get uniform pressure

If you have not practical experience on branding temperature, please set the temperature 200+ for rubber, 300+ for wood, add little by little to get perfect branding effect 

Branding effect

Hand-Held Electric Heated Branding Iron with Rotary Numbering Die can mark serial numbers on Plastic, Wood, Plastic and other thermo material, such as tire, battery case

Detailed Images

Hand-Held Electric Heated Branding Iron with Rotary Numbering Die accept customized construction on its branding die, pressing structure and controlling system

After-sales service

AFTER-SALES SERVICE

 After purchasing at KEEPLEADER™ is first step of our after-service, all of machines at KEEPLEADER™ has one year guarantee, we provide free samples for

defected parts to do replacement except for human damage, under information for your notice

01: KEEPLEADER™ always posts the new technical file in our homepage that can help our client

in new technical information of machines’ design, character, application, operation, maintenance,

and related, KEEPLEADER™ also welcome our clients feed back the machines’ working condition

that can get one to one service

02: If the machine you purchased has any defects, please contact sales representative

at KEEPLEADER™, we will assign our experienced engineer analyze your case and provide technical

support, in case of damaged parts that cannot repair, KEEPLEADER™ will provide a new parts to replace the defect

03: For any replacement and maintenance, KEEPLEADER™ has user manual and training video

04: KEEPLEADER™ can go to oversea for on-site training

05:  KEEPLEADER™ can provide remote training

06:  KEEPLEADER™ can provide electric diagram under request